5/29/2023 0 Comments Klv apple xsanIn this example we want to end up with a 2 drive, RAID 1 (mirror) LUN for metadata, a second 2 drive, RAID 1 LUN for the journal, and then two RAID 5 data LUNs. Apple provides some discussion and guidance on drives, LUNs, and Storage Pools, in the Xsan Management Guide, which we won’t be discussing here. This section will discuss some strategies and then see how to label the LUNs for use in Xsan. Please see your vendors manual on the exact method for your storage. Assign the private hostnames to each of the systems with sudo scutil -set HostName ĭifferent storage vendors have different interfaces for creating LUNs on their storage.If you haven’t, assign the appropriate IPs to the metadata ethernet ports in System Preferences.Test your DNS entries with host and host.Make sure your other DNS server(s) are still listed and are below the MDC ip. On both MDCs (and eventually any clients) add this server’s IP to the DNS servers list for the primary (non-metadata service) in System Preferences.Now start the dnsmasq process by bootstrapping the launchdaemon: sudo launchctl bootstrap system /Library/LaunchDaemons/uk.# localhost is used to configure the loopback interface The lines should be formatted as ip (tab) hostname, for example: #.At the bottom of the file add a line for each system.In a Terminal window run sudo nano /etc/hosts (or use your plain text editor of choice).Edit the /etc/hosts file to add both MDCs (and any fibre connected clients).We just need the most basic functionality. On the Mac that will host your dns, copy/move these items, creating the folders as necessary:.Copy src/dnsmasq, contrib/MacOSX-launchd/uk., and to your MDC.Open a Terminal window to the expanded folder (i.e.Expand the tar.gz file in your Downloads location.Download the current dnsmasq tar.gz from their site on a Mac that matches the architecture of your MDCs (Intel vs M1) and has Xcode or the Xcode Command-line tools installed.dnsmasq is available in Homebrew or MacPorts, but for our Xsan, I didn’t want to install all the extra that comes with a package manager. Running additional services on an MDC isn’t recommended, but works for our test system. For our solution we installed dnsmasq on our MDC. To provide DNS services for the metadata network, you could use any number of solutions (a Raspberry Pi, a smart switch with that service, etc). Our Brocade Fibre Switch only supports 16 or 32 Gb/s SFPs, so we needed to upgrade our test RAID to also support 16Gb/s.Check the speeds that the fibre switch, client HBAs, and storage support.
0 Comments
Leave a Reply. |